Storlek Dim | A | B | C | φD1 | φD2 | φD3 | 4 xφD4 | E | FxF | G | H | K | L | φd | PCD | NxφD | a ° |
PN10 | PN16 | PN10 | PN16 | PN10 | PN16 | PN10 | PN16 |
DN40(1.5") | 69 | 136 | 32 | 65 | 50 | 35.25 | 4 xφ7 | 4 | 9x9 | 10 | 32 | 3 | 11.2 eller 13.8 | 10 eller 12.6 |
|
DN50(2") | 80 | 161 | 42.04 | 65 | 50 | 35.25 | 4 xφ7 | 4 | 9x9 | 10 | 32 | 3 | 13.8 | 12.6 |
DN65(2.5") | 89 | 175 | 44.68 | 65 | 50 | 35.25 | 4 xφ7 | 4 | 9x9 | 10 | 32 | 3 | 13.8 | 12.6 | Konsultation |
DN80(3") | 95 | 181 | 45.21 | 65 | 50 | 35.25 | 4 xφ7 | 4 | 11x11 | 10 | 32 | 3 | 13.8 | 12.6 |
DN100(4") | 114 | 200 | 52.07 | 90 | 70 | 55.25 | 4 xφ10 | 4 | 11x11 | 12 | 32 | 5 | 17.77 | 15.77 |
DN125(5") | 127 | 213 | 54.36 | 90 | 70 | 55.25 | 4 xφ10 | 4 | 14x14 | 14 | 32 | 5 | 20.92 | 18.92 |
|
|
|
DN150(6") | 139 | 226 | 55.75 | 90 | 70 | 55.25 | 4 xφ10 | 4 | 14x14 | 14 | 32 | 5 | 20.92 | 18.92 | ★ |
DN200(8") | 175 | 260 | 60.58 | 125 | 102 | 70.25 | 4 xφ12 | 4 | 17x17 | 17 | 40 | 5 | 24.1 | 22.1 |
DN250(10") | 203 | 292 | 65.63 | 125 | 102 | 70.25 | 4 xφ12 | 4 | 22x22 | 22 | 40 | 8 | 31.45 | 28.45 |
DN300(12") | 242 | 337 | 76.9 | 125 | 102 | 70.25 | 4 xφ12 | 4 | 22x22 | 24 | 40 | 8 | 34.6 | 31.6 |
DN350(14") | 267 | 368 | 75 | 125 | 102 | 70.25 | 4 xφ12 | 4 | 22x22 | 24 | 40 | 8 | 34.6 | 31.6 |
|
|
|
DN400(16") | 297 | 400 | 85.7 | 197 | 140 | 100.3 | 4 xφ18 | 5 | 27x27 | 27 | 51.2 | 72 | 10 | 36.15 | 40.95 | 33.15 | 37.95 |
|
|
|
DN450(18") | 315 | 422 | 104.6 | 197 | 140 | 100.3 | 4 xφ18 | 5 | 27x27 | 27 | 51.2 | 72 | 10 | 12 | 40.95 | 45.86 | 37.95 | 42.86 |
|
|
|
DN500(20") | 348 | 480 | 130.28 | 197 | 140 | 100.3 | 4 xφ18 | 5 | 36x36 | 32 | 64.2 | 82 | 10 | 12 | 44.12 | 48.72 | 41.12 | 45.72 |
|
|
|
DN600(24") | 444 | 562 | 151.36 | 276 | 165 | 130.3 | 4 xφ23 | 6 | 36x36 | 36 | 70.2 | 82 | 16 | 54.62 | 57.98 | 50.62 | 53.98 |
|
|
|
NOTE:The diameter of stem is 10mm when the top flange connection is key type.It is 12.6mm when
the connection is square or double “D”type.
Nominellt tryck | 1.00 / 1.60 | Mpa |
Skaltesttryck | 1.50 / 2.40 |
Tätningstesttryck | 1.10 / 1.76 |
Ansikte mot ansikte är enligt | ISO 5752
|
API 609 |
DIN 3202 |
| AS 2129 Tabell D / Tabell E |
★ | ASME B16.1 Klass 125 & ASME B16.42 Klass 150 |
BS 4504 PN10 / PN16 |
Fläns Borrad är Enligt | BS 10 Table D / Table E |
DIN 2501 PN10 / PN16 |
ISO 7005-2 PN10 / PN16 |
JIS 2220 5K / 10K |
Prestandadata
Kroppstyp | Rån |
Storlek | 1.5 "-24" |
Designa | API609 |
Toppfläns | ISO 5211
|
Testbesiktning | API598 |
Lämpligt medium | Vatten, avlopp, luft, olja, salter, etc |
Verksamhet | Lever, Worm gear, Electric Actuator and Pneumatic |
Funktioner
1) Kan användas för att skära av och reglera medium
2) Enkel installation och underhåll, den kan också monteras där det behövs.
3) Simple, compact structure, quick 90 degree on-off operation.
4) Skivan har tvåvägslager, som kan vara utan läckage under tryckprovet.
5) Centrera skivans struktur, för att säkerställa ett litet vridmoment för att öppna och stänga.